e-ISSN : 0975-4024 p-ISSN : 2319-8613   
CODEN : IJETIY    

International Journal of Engineering and Technology

Home
IJET Topics
Call for Papers 2021
Author Guidelines
Special Issue
Current Issue
Articles in Press
Archives
Editorial Board
Reviewer List
Publication Ethics and Malpractice statement
Authors Publication Ethics
Policy of screening for plagiarism
Open Access Statement
Terms and Conditions
Contact Us

ABSTRACT

ISSN: 0975-4024

Title : Influence of Inoculum Content on Performance of Anaerobic Reactors for Treating Cattle Manure using Rumen Fluid Inoculum
Authors : Budiyono, I N. Widiasa, S. Johari and Sunarso
Keywords :   rumen fluid; inoculum; biogas yield.
Issue Date : Dec 2009
Abstract :
Biogas productions of cattle manure using rumen fluid inoculums were determined using batch anaerobic digesters at mesophilic temperatures (room and 38.5 oC). The aim of this paper was to analyze the influence of rumen fluid contents on biogas yield from cattle manure using fluid rumen inoculums. A series of laboratory experiments using 400 ml biodigester were performed in batch operation mode. Given 100 grams of fresh cattle manure (M) was fed to each biodigester and mixed with rumen fluid (R) and tap water (W) in several ratio resulting six different M:W:R ratio contents i.e. 1:1:0; 1:0.75:0.25; 1:0.5:0.5; 1:0.25:0.75; and 1:0:1 (correspond to 0; 12.5; 25, 37.5; 50, and 100 % rumen, respectively). The research showed that, either in room temperature as well as in 38.5 C, the best performance of biogas production was obtained with rumen fluid in the range of 25-50 %. Increasing rumen content will also increase biogas production. This is suggest that, due to the optimum total solid (TS) content for biogas production between 7-9 % (or correspond to more and less manure and total liquid 1:1), the rumen fluid content of 50 % will give the best performance for biogas production. However, intensively research need to be carried in further research to study interaction effect of TS and rumen content to biogas production.

Page(s) : 109-116
ISSN : 0975-4024
Source : Vol. 1, No.3